Wednesday, October 11, 2017

A twenty four fingerboard neck guitar notes chart



These is a map to the twenty four guitar neck, six strings and twenty four fingerboard. Each pentagram below is a guitar string.


The twenty four guitar notes


Monday, July 18, 2016

Stratocaster tremolo piezo + piezo mod

This is a mod to adapt a under saddle acoustic guitar piezo to a stratocaster block tremolo anda a common piezo inside the guitar body.

 

  • Use a rotary tool and a file to make a groove at the upside of the block:


strat block tremolo

strat block tremolo

strat block tremolo



  • ... until the piezo fit it, with only a small part outside:

  strat block tremolo 


  • Screw the other parts of the tremolo with the piezo wire out of the block:

*Maybe you will have to file the wood of the guitar under the bridge, a litle bit, to adapt the extra wire.

strat block tremolo

strat block tremolo



  •  Othewise, if you don't use the tremolo arm, like me, it is possible to use the other side of the block, making a extra hole to pass the wire:


strat block tremolo


strat block tremolo



  •   Set up the tremolo at the guitar, use the grounding hole to pass the piezo wire and conect it to the guitar circuit. Some hot glue will fix better some parts:

strat block tremolo

strat block tremolo
strat block tremolo

strat block tremolo


  •  Next step....fix a common piezo at the inside of the guitar body, near as possible of the bridge, using a double face tape:

     

strat piezo

 strat piezo

strat piezo


The tromolo piezo will have a lot of influence of the coils, producing a lot of reverbation. My sugestion is to mix the two piezos with a resistor (or a pot) like that:

 

strat piezo

* 1M or less... depends on the piezo output level.


Finaly, mixing the pickup mod (http://guitar4geek.blogspot.com.br/2016/06/stratocaster-wire-mod-series-pickups.html) with this piezo mod:



strat mod

*All pots are 500K


strat mod



* Other suggestions:





Tks to Pete from MukerBude.de: http://www.mukerbude.de/_MATERIAL/Anleitung%20-%20Stratylon.pdf


Thursday, June 23, 2016

Stratocaster wire mod - in series pickups switch


Looking at the picture below, the first switch (mod 1) configures the pickups in series:
  • neck+middle (series)
  • bridge+middle (series)
Besides that, a second switch (mod 1b) inverts the middle pickup, making the sound thicker or thiner.

The mod 1 switch also connects the tone control to the neck+middle "fake" humbucker.

*All the pots are 500K, making a more open sound and helping the basswood body limited tone response.








  • Mod 1 ON, mod 1b OFF and strat switch in position A: bridge+middle with thin sound
  • Mod 1 ON, , mod 1b OFF and strat switch in position B, C, D: mute
  • Mod 1 ON, mod 1b OFF and strat switch in position E: neck+middle with thin sound 

  • Mod 1 ON, mod 1b ON and strat switch in position A: bridge+middle with thick sound
  • Mod 1 ON, , mod 1b ON and strat switch in position B, C, D: mute
  • Mod 1 ON, mod 1b ON and strat switch in position E: neck+middle with thick sound



Some real pictures:








Friday, June 10, 2016

The new cabinet tolex mod - fender color alike

This is a new face for the little cabinet of my 5F1 clone, I only take of the brown tolex and put in a yellow one (fender alike).

Lets see the tolex mod:

  • The old style

  •  Take it off
  • Lots of work
  •  New style












  • The amplifier guts version 2.0 with updated pictures (2016):



 



Sunday, July 26, 2015

The C major scale in a vertical approach

The C major scale on the guitar fretboard in diferents vertical positions until XIII fret:


  • The fretboard below shows some shapes example for the C major scale:
Guitar Scales

* A version for a  black and white printer:

guitar sight reading



* The sights reference: 

 


*For more details see this other postage:





Boss MT-2 Metal Zone and Behringer UM300 Ultra Metal Mod


Mods for more thicker and compressed sound:

  • Change the DO04 and DO03 to Germanium diodes, or use a switch to select the original Se diodes or the Ge diodes. I have used two 1n60 diodes.

See the picture:
Metal zone mod



*Use Boss schematic above to mod this Behringer stomp box.

Sunday, April 12, 2015

Boss Chorus CH 1 and Behringer UC200 Mod

Mods for more thicker effect options:

  • Add a toggle switch (on-off-on) to select the C18 values, this will change the delay time of the out of tune signal, before it is added to the guitar signal. The middle position will be off and only a 5pf (or 4,7pF) value is seeing by the circuit, no delay at all, the others positions will select two 0 to 100pF trimmers that can be adjusted as you wish, for a pleasant delay color. Adding more delay time, more thicker will be the chorus effect.
  • Optionally, reduce the value of C30 (or remove it) to upper the trebles, only in case of a dead tone problem.

*     In place of one trimmer, could be used the original 47pF capacitor.
**   Behringer have originaly  a 5pF in parallel to a 47pF (C18) capacitor.
*** The C18 mod is very famous in the internet foruns.

See the picture:



boss ch1 mod



*Use Boss schematic above to mod this Behringer stomp box.


Saturday, March 21, 2015

Boss Tremolo TR 1 and Behringer UT100 Mod

Mods for more tone options and balance the on and off stomp's volume:

  • Replace the R9 resistor from 10K to 18K (or more), to balance the on and off stomp volume. I've choose 18K.
  • Add a on-off-on toggle switch to select the C4 values (or no C4), this will make a subdued, but perceptive, diference in the effect tone. The middle position will select none capacitor, the Boss TR1 came originally with 0,1uF cap and the Behringer came with a 0,68uF eletrolitic cap. You can select 0,1uF, 0,68uF and none capacitor, or try out others values.

See the picture:


Boss Tremolo TR 1 and Behringer UT100 Mod



*Use Boss schematic above to mod this Behringer stomp box.


Boss HyperFuzz FZ-2 or Behringer Super Fuzz SF300 Mod

Mods for a more pleasing distortion without the "octave" effect and adding the volume control in the boost mode:
  • Remove Q13 and its circuit to get the octave effect out, as the picture shows, its possible to remove the 1k resistor initially to test this mod.
  • Replace the 10K in Q14 base for a 1K resistor, to increase the stomp volume.
  • Jump the part of the mode switch and cut one lead to add the volume control to the boost mode.

See the picture:

FZ-2 SF300 MOD


*Use Boss schematic above to mod this Behringer stomp box.


Friday, February 27, 2015

Les Paul wire mod


First MOD:

The first mod is the following:

  • A piece of a 0,5 mm thick guitar cable (I take off the rubber insulation and put a  shrink tubing in place), linking the jack to the pickups switch.
  • I have Used two 22nF russian PIO capacitors at the begining, and then have changed one 22nF to 15nF to the rhythm pick-up (copying the popular woman tone mod).
  • All wire used are non tinned copper thick wire.
  • Implemented a 50's style wiring to increase the highs.

*The tone is warm and big, a lot of bass and low middle, good detailed highs.
 - I guess, IMO, this tone is because the non tinned cooper thick wire and the PIO caps.
Pictures:

les paul wire

             Using a 15nF PIO:


les paul wire


les paul wire




Second MOD:


The second and current modification is as follows:

  • All wires is a tinned copper wire (vintage style wire for guitar).
  • Used two Russian capacitors PIO, one 22nF for treble and one 15nF to the rhythm (yes, the woman tone mod).
  • The 50 's style wiring, to increase the highs, remains the same.
  • Big potenciometers Gotoh 24 mm for a better construction.

*Sugestion: treble bleed mod (only the capacitor without the resistor option) for volume pots - 250pF to 680pF (sorry no pictures taken).


** The tone is dry, vintage, more single coil style, most of the bass and low middle are gone , highs became more extended and predominant.
- I think, IMO, this tone is because the tinned copper cable.

Pictures: 


les paul wire



les paul wire



les paul wire



les paul wire


  • Recently I have unpotted the pickups, seeking for a more detailed tone.